0
0 products
New Products

Categories

Property Drainage Fittings

The WaBeK building drainage system is an impact-resistant and strong building drainage suitable for all installations. It has a universal seal that is easily replaceable to oil resistant. The sewer meets the requirements of the EN 1451 standard and has been granted the Nordic Poly Mark marking right.

The most liked products in the webshop

2470196

INSPECTION PLUG WITH SCREW COVER 110

HTP osa, käytetään puhdistusaukon tekemiseen viemäriputkeen. Muhvit osan molemmissa päissä.

2470223

PLUG 50

A plug to seal the sewer pipe in the final installation.

2470224

PLUG 75

A plug to seal the sewer pipe in the final installation.

2470226

PLUG 110

A plug to seal the sewer pipe in the final installation.

2470306
2470324

EXTENSION MUFF HTP 70 X 75 VA/HT

An extension coupling for house sewer pipes. Material polypropylene. Compatible with cast iron and PP pipes.

2470327

EXTENSION MUFF HTP 100 X 110 VA/HT

An extension coupling for house sewer pipes. Material polypropylene. Compatible with cast iron and PP pipes.

2470346

WC-SLEEVE ELBOW TORN 110 X 88,5 HTP

HTP agnle with sockets, low construction. Used under the toilet bowl under the midsole.

2470606

WALL PENETRATION SLEEVES 110 HTP

Betoniseinän lävistykseen käytettävä yhde.

2470607

WALL PENETRATION SLEEVES 160 HTP

Betoniseinän lävistykseen käytettävä yhde.

2471233

PLUG FOR VERTICAL PIPE 50 HTP

Sewer pipe HTP plug for final installation. Used at the end of the upright tube.

2471234

PLUG FOR VERTICAL PIPE 75 HTP

Sewer pipe HTP plug for final installation. Used at the end of the upright tube.

2471236

PLUG FOR VERTICAL PIPE 110 HTP

Sewer pipe HTP plug for final installation. Used at the end of the upright tube.

2471703

SLEEVE FOR VERTICAL PIPE 50 HTP

Viemärin irtomuhvi pystyputkeen, asennetaan putken sisään.

2471704

SLEEVE FOR VERTICAL PIPE 75 HTP

Viemärin irtomuhvi pystyputkeen, asennetaan putken sisään.

2471706

SLEEVE FOR VERTICAL PIPE 110 HTP

Viemärin irtomuhvi pystyputkeen, asennetaan putken sisään.

2471766

SHORT RED. FOR PIPE 75 X 50 HTP VERTICAL PIPE
PYSTYPUTKIOSA

Osa menee 75 mm viemäriputken sisään. Käytetään esim. lattaipinnan tasoon katkaistun putken jatkamiseen.

2471772

SHORT RED. FOR PIPE 110 X 75 HTP VERTICAL PIPE
PYSTYPUTKIOSA

Osa menee 110 mm viemäriputken sisään. Käytetään esim. lattaipinnan tasoon katkaistun putken jatkamiseen.

2471781

SHORT RED. FOR SLEEVE 110 X 50 HTP VERTICAL PIPE
PYSTYPUTKIOSA

Osa menee 110 mm putken tai osan muhvin sisään.

2471782

SHORT RED. FOR SLEEVE 110 X 75 HTP VERTICAL PIPE
PYSTYPUTKIOSA

Osa menee 110 mm putken tai osan muhvin sisään.

2480102

REDUCER 50/32

Muhvi/osaliitos.

2480151

PVC-U SOCKET 32

For sewer pipe extensions. A seal and coupling at both ends of the plug joint. No stop in the middle.

2480161

DOUBLE SOCKET 32

For sewer pipe extensions. A seal and coupling at both ends. A stop is used in the middle of the...

2480221

PLUG 32

A plug to seal the sewer pipe in the final installation.

4057820
4057821

OIL PROVED SEALANT 160 BL
WAVIN PT

Ei enää valikoimassa Wavinilla 2023

4162820

INWARD RELIEF VALVE 50-75-110
VIESER ONE

Alipaineventtiili on tarkoitettu pääasiassa käytettäväksi suoraan ulkoilman yhteydessä olevan tuuletusviemärin rinnalla. Alipaineventtiilillä voidaan parantaa esim. yksittäisen viemärihaaran toimivuutta, kun viemärihaara on vaikea...